Sculpted Battleboard Lowtown Cobblestone Setup
By Dwarven Forge - Miniature Terrain for the gaming community | Published: 2026-10-18
Category: How-to Guides
Learn how to set up and use the 12x12 Dwarvenite Sculpted Battleboard Lowtown Cobblestone for modular terrain builds, including placement, magnet use, and common mistakes.
Quick answer
Set up your Sculpted Battleboard Lowtown Cobblestone by aligning it with existing terrain, using the magnetic side for terrain trays, and building directly on top for seamless elevation.
Why the magnetic side matters
The Sculpted Battleboard Lowtown Cobblestone has magnets on the opposite side of the sculpted surface. This is designed to work with terrain trays, similar to the original battleboards from Wildlands. Using the magnetic side lets you secure the board to a tray, preventing shifting during play.
If you don't use a terrain tray, the magnets are simply a bonus. The board's ABS construction and same height as standard floors mean it works standalone on a table, but the magnetic option is there when you want extra stability.
Building in-line vs. on top
Because the board is the same height as typical floors, you have two placement options: build in-line with existing floor pieces to extend a street, or build directly on top to create a raised platform or second story. Both are valid, but they change how you plan your encounter area.
In-line placement works best for expanding a lowtown street scene. On-top placement is useful for elevated vantage points or rooftop encounters. Choose based on the narrative, not just aesthetics.
Setup steps
- Check the board orientation: Identify the sculpted, UV-printed side (the top) and the side with magnets (the bottom). Place the board with the sculpted side facing up for standard play. A common mistake is placing the board upside down; the magnets should always face down unless you intentionally want them exposed.
- Align with adjacent terrain: Position the board next to existing floor pieces or other battleboards, matching the edges so the cobblestone pattern continues without gaps. Because the board is the same height as floors, it should sit flush. Check that all edges are level; a raised edge can cause miniatures to tip or look misaligned.
- Use the magnets with terrain trays: If using a terrain tray, place the board on the tray with the magnet side down. The magnets will hold it in place during play. If not using a tray, skip this step. Ensure the tray is compatible with magnetic boards; not all trays are magnetic.
- Build in-line or on top: Decide whether to extend your street in-line with other floors or to stack terrain on top for elevation. For in-line, butt the board against existing pieces. For on-top, place walls or other floors directly on the sculpted surface. When building on top, make sure the base is stable; the board's flat surface provides a solid foundation.
- Secure for play: Once placed, test the stability by gently pressing on the board. If it shifts, adjust the alignment or use the magnetic tray. Then set your miniatures and begin. After setup, double-check that no gaps are visible between boards; fill with smaller terrain pieces if needed.
Product details
- Sculpted Battleboard 12"x12": Lowtown Cobblestone: This is a 12"x12" ABS board, fully textured, sculpted, and UV printed to resemble typical Dwarvenite pieces, and it is the same height as floors. The matching height and texture let you mix it seamlessly with existing terrain, so your lowtown cobblestone streets look continuous rather than patched.
Sculpted Battleboard 12"x12": Lowtown Cobblestone
