Quick answer
Wash and dry the unpainted pieces, test-fit your multi-level layout before gluing anything, then prime and paint in subassemblies so seams and contact points stay clean. Keep elevation joints dry-fitted until you have confirmed the stack is stable.
Why subassembly painting beats painting the full stack
Painting a complete multi-level build as one object makes it hard to reach the undersides of platforms and the inner faces of elevation pieces. It also locks you into one layout. If you paint in small subassemblies, you can rotate pieces, swap levels, and touch up worn contact points without repainting the whole stack.
The trade-off is more handling between steps. Label the underside of each piece with a pencil or removable tape so you can match painted parts to your planned layout after they dry.
Where assembly decisions actually matter
Not every joint needs glue. For a multi-level dungeon setup, glue only the connections you want to keep permanent, such as a core stack that repeatedly collapses during play. Leave removable platform and stair connections dry-fitted so you can change the route between sessions.
If you plan to store the set flat, avoid gluing tall vertical assemblies that will not fit in your case. Test your storage box before committing to a permanent shape.
Step-by-step: prep, assemble, and paint
- Wash and dry the pieces: Rinse the unpainted pieces in lukewarm water with a drop of mild dish soap, scrub gently with a soft brush, and let them air-dry completely before handling. Common mistake: painting while seams or recesses are still damp, which traps moisture under primer. Checkpoint: every piece feels dry and no water beads remain in the corners.
- Sort by role and test-fit the layout: Group pieces by height and footprint, then dry-fit your multi-level dungeon setup on the table before any glue. Mark the connections you want permanent and the ones you want to keep swappable. Common mistake: gluing the tallest stack first and discovering it blocks access to lower rooms. Checkpoint: you can reach every room and the stack stands without wobble.
- Prime in subassemblies: Prime the pieces in small groups, keeping removable platforms and stairs separate from glued core stacks. Use thin coats and rotate each piece to reach undersides and inner faces. Common mistake: spraying too close and filling fine detail. Checkpoint: primer is even, detail is still sharp, and no bare patches show on contact faces.
- Paint the base tones before assembly: Paint stone, floor, and edge tones while the pieces are still separate. This is the easiest time to reach the faces that will meet at elevation joints. Common mistake: painting the whole stack after assembly and leaving unpainted strips at the seams. Checkpoint: every visible face has at least a base coat before you join pieces.
- Assemble permanent joints and touch up: Glue only the connections you marked as permanent, following the adhesive instructions, and let them cure fully. Then touch up glue seams and worn edges with your base color. Common mistake: rushing the cure and shifting the stack, which opens the seam. Checkpoint: the glued assembly sits flat and the seam disappears under touch-up paint.
- Seal and store flat: Apply a matte varnish to high-contact edges and platform tops after the paint is fully dry. Store the set flat or in the subassemblies you painted, not as one tall tower. Common mistake: stacking heavy pieces on fresh varnish before it cures. Checkpoint: varnish is dry to the touch and no pieces stick together in storage.
Product facts
- Vaulted Dungeon Elevation (Unpainted): An assortment of core elevation pieces for creating dynamic multi-level builds. You get the core pieces for stacked layouts, so plan your levels before painting rather than treating each piece as a standalone miniature.

Vaulted Dungeon Elevation (Unpainted) - Vaulted Dungeon Elevation (Unpainted): Once sold out, this set will be retired and replaced with an updated set composition called Dungeon Elevation - Narrow. If you want this exact assortment for a planned layout, confirm your piece count now; the replacement set will have a different composition.


