Start with what this piece actually is
Metal Short Stairs (Unpainted) is a single Starforged sci-fi terrain piece from Dwarven Forge, part of the KS9 line and the Biscuit System for elevation and bridges. It arrives unpainted, so the finish is yours to decide. That is the whole job: prep it, paint it, and set it into a layout where short elevation changes need a clean transition.
Because the supplied record does not include material composition, dimensions, or manufacturer prep and care instructions, this guide sticks to general beginner practice for prepping and painting an unpainted miniature terrain piece. Treat any product-specific step as something to confirm on the piece or its packaging before you commit.
Catalog details that shape your prep
- Metal Short Stairs (Unpainted): Metal Short Stairs (Unpainted) is an individual terrain piece in the Starforged (Sci-Fi), KS9 line, using the Biscuit System for elevation and bridges. The Biscuit System connection points are where paint and primer buildup can interfere with fit, so keep those areas clean while you work.

Metal Short Stairs (Unpainted) - Metal Short Stairs (Unpainted): It is offered unpainted, so you can finish it to match your table. You are not matching a factory paint scheme; you are choosing one, which means your color plan should start before the first brushstroke.
- Metal Short Stairs (Unpainted): SKU: IN-EV-901-U (Standard); catalog price USD 2.12. At this price, a single piece is an easy way to test a sci-fi paint scheme before committing to a larger set.
Prep steps before the first brushstroke
The supplied record does not list mold release, flash, or washing instructions, so use these as standard beginner checkpoints rather than manufacturer steps.
- Inspect the piece in good light: Look over the stair treads, side walls, and biscuit connection points for anything that would show through paint. Note it now so you are not surprised later.
- Clean only what needs cleaning: If you wash the piece, let it dry completely before priming. Water trapped in recesses or connection slots can ruin a primer coat.
- Protect the biscuit connections: Mask or carefully avoid the Biscuit System contact areas when priming and painting. A thin, even coat is easier to keep out of tight fits than a heavy one.
- Prime in thin passes: Use light, repeated passes rather than one wet coat. Thin primer preserves detail on small stair treads and keeps connection points usable.
- Let primer cure fully: Do not start painting while the primer is still tacky. A fully cured base coat is what keeps later layers from lifting.
Plan a sci-fi metal scheme before you paint
The piece is named Metal Short Stairs, and it belongs to the Starforged sci-fi line, so a worn industrial or spacecraft-interior look is a natural fit. Decide on three colors before you start: a dark base, a mid-tone metal, and one accent for edges or warning stripes. Keeping the palette small makes a single small piece read clearly on the table.
Paint the recesses and tread shadows first with the darkest color, then drybrush or edge-highlight the raised treads and side rails with the mid-tone. Save the accent for one or two deliberate spots, such as the stair nosing or a side panel, so the piece does not become visually noisy next to other terrain.
Checkpoints while the paint dries
- Check the biscuit fit before final coats: Test the piece against the Biscuit System connection you plan to use before you add varnish or a heavy final layer. If it is already tight, stop adding paint to the contact areas.
- Keep treads readable: Stairs are a gameplay surface. If paint is filling the step edges, thin your paint or wipe back the excess before it dries.
- Match the surrounding table, not just the box art: Since the piece is unpainted, compare it under your usual gaming light against the sci-fi terrain it will sit beside. Adjust the accent color if it clashes.
What the supplied information does not cover
The supplied record does not include material composition, dimensions, or official care and compatibility instructions for Metal Short Stairs (Unpainted). That means specific claims about washing, sealing, or drop resistance are not confirmed here. If those details matter for your build, check the piece and its packaging directly rather than assuming a procedure from this guide.
For a beginner, the safe approach is conservative: thin layers, protected connection points, and a full cure between stages. That keeps a small, inexpensive piece like this one useful as a test bed for the rest of your Starforged terrain.


