Texture Mat 24x24 Swamp Water: Table Setup Guide

Quick answer

To set up your Dwarven Forge Texture Mat 24x24 Swamp Water, unroll it, gently flatten any shipping curls, then place terrain pieces on top or use it as an open water mat for boat encounters.

How to set up your swamp water mat

1. Unroll and inspect the mat: Take the mat out of the shipping tube and lay it flat on your table. Because these mats are rolled for shipping, they might need some smoothing out after unboxing. Check for any creases or curled edges. If the mat is stubbornly curled, place heavy books or terrain pieces on the corners for an hour to flatten it.
2. Flatten the mat gently: Do not use heat or force. Instead, roll the mat in the opposite direction of the curl and let it rest under a light weight. The fabric-like material will relax over a few hours. Never iron or steam the mat—it can damage the printed swamp pattern.
3. Position terrain pieces on top: Place your swamp encounter pieces—like ruins, trees, or floating debris—directly onto the mat. The subtle 1-inch grid helps you measure distances without drawing on the mat. For boat encounters, leave the center open for ship movement. Avoid stacking heavy resin pieces on a freshly flattened mat until it fully settles to prevent new creases.
4. Use the grid for tactical play: The faint 1-inch grid is designed for movement tracking. Align your miniatures' bases with the grid intersections to measure movement ranges or area-of-effect templates. The grid is subtle enough to stay immersive during roleplay. If the grid is too faint for your group, use a dry-erase marker on the mat's surface—test on a corner first to ensure easy removal.
5. Store the mat properly after use: Roll the mat loosely with the printed side out to avoid deep creases. Store it in the original tube or a flat portfolio. Never fold it. A rolled mat stored in a cool, dry place will stay flat for your next swamp encounter.

Product details

• Texture Mat 24"x24" Swamp Water (GRIDLESS): Provides a spacious 24-inch area to place whatever pieces you'd like on top or to create an expansive open water mat for any boat-faring types. Graphic is printed with a subtle 1” grid for tactical movement. You get a full 2x2 foot swamp surface that works equally well as a base for scatter terrain or as a standalone water encounter mat, all while keeping movement tracking simple.